Instruction for visibility LED & communicator charger

Download

Be seen and never run out of battery for your communicator.

1- Install it on your helmet when it has reached temperatures above 65°F or 20°Celcius.
2-Clean well with alcohol swabs the places where you will stick the components and dry well.
3-Install the visibility LED strip first. 
4-Connect the power wire (RCA) coming from the machine to be sure to find the right place to install the    junction box.
5-Press firmly for a few seconds to stick well.
6-Choose the right connector for your communicator, either Micro USB or USB C.  Certain model            requires an adapter supplied (e.g., Sena)Press firmly for a few seconds to stick tightly.

 -Sena with Micro USB connector: Install the small magnetic USB C connector on the magnet, then install    the black USB C to Micro USB adapter and plug into the communicator.

 -Sena with USB C connector: Install the small magnetic Micro USB connector on the magnet, then install    the white Micro USB to USB C adapter and plug into the communicator.