Charger for Communication System for BRP Helmet with E-Linq Connector

Download

1-The connection of your BRP helmet
2-Your communicator charger
3-Power output for communicator, USB C female connection
4-Micro USB connector that goes to the communicator (Choice)
5-USB C connector that goes to communicator (Choice)
6-USB C connector that goes to the charger
Install the charger on the magne􀆟c connector of your helmet. Choose the right connection cable for your communication system, either Micro USB or USB C and connect it. Now you can connect your Linq magnetic cable from the machine to the charger. That's it, you will never run out of battery on your communication system again.
P.S.: Compatible with most communication systems.
Not compatible with systems that use the same port for charging as for headphones.

Accuracy: When powering your communications system, make sure your heat control is at maximum, then you can adjust your level.